We can also design and manufacture press tools, dies, jigs & fixtures for sheet metal parts and assemblies as per customer requirements.
Hydraulic Triple Action
These presses are equipped with a triple action pressing sequence to achieve a part that requires a draw and forming operation utillizing a cushion in the bed of the press.
The presses integrate a common platform to accommodate the new building where these machines will be housed. The presses consist of a 100-ton punch capacity, 50-ton clamp capacity and 50-ton cushion capacity. These presses are also equipped with position control system repeatable within + .002. Position set points are controlled through an operator interface.
Hydraulic Press Tripple Action
Name of Machine
Hydraulic Press Tripple Action
Make
Hydrotech Engineers
Capacity
300 Ton
Qty.
02
Year of Mfg.
1990
Bed Size
1250 X 1250
Stroke
600 mm
Shut Height
850
Cushion
100 Ton Cushion Stoke 350mm
Power Presses
Power Press (Mech.)
Name of Machine
250 Ton (H - Frame)
Make
N.K. Press
Capacity
250 Ton
Qty.
01
Year of Mfg.
2005
Bed Size
1030 X 1030
Stroke
175 mm
Shut Height
725 mm
Cushion
N.A
Power Press - Hydraulic PLC Control
Name of Machine
200 Ton (H - Frame)
Make
--
Capacity
--
Qty.
--
Year of Mfg.
--
Bed Size
--
Stroke
--
Shut Height
--
Cushion
--
Power Press (Mech.)
Name of Machine
250 Ton (C - Frame)
Make
--
Capacity
--
Qty.
--
Year of Mfg.
--
Bed Size
--
Stroke
--
Shut Height
--
Cushion
--
Power Press (Mech.)
QTY. - 02
Name of Machine
150 Ton (H - Frame)
Make
Basant Engg.
Capacity
150 Ton
Qty.
02
Year of Mfg.
2006
Bed Size
740 X 740
Stroke
150 mm
Shut Height
510 mm
Cushion
N.A
Power Press (Mech.)
Name of Machine
150 Ton (C - Frame)
Make
--
Capacity
--
Qty.
--
Year of Mfg.
--
Bed Size
--
Stroke
--
Shut Height
--
Cushion
--
Power Press (Mech.)
QTY. - 03
Name of Machine
100 Ton (H - Frame)
Make
N.K. Press
Capacity
100 Ton
Qty.
03
Year of Mfg.
2006
Bed Size
665 X 665
Stroke
125 mm
Shut Height
450 mm
Cushion
N.A
Power Press (Mech.)
QTY. - 02
Name of Machine
100 Ton (C - Frame)
Make
N.K. Press
Capacity
100 Ton
Qty.
02
Year of Mfg.
2005
Bed Size
750 X 900
Stroke
125 mm
Shut Height
450 mm
Cushion
N.A
Power Press (Mech.)
QTY. - 02
Name of Machine
80 Ton
Make
N.K. Press
Capacity
80 Ton
Qty.
02
Year of Mfg.
2005
Bed Size
620 X 620
Stroke
350 mm
Shut Height
950 mm
Cushion
N.A
Power Press (Mech.)
QTY. - 05
Name of Machine
50 Ton (C Type)
Make
Basant Engg.
Capacity
50 Ton
Qty.
05
Year of Mfg.
2004
Bed Size
530 X 700
Stroke
90 mm
Shut Height
355 mm
Cushion
N.A
Power Press (Mech.)
QTY. - 04
Name of Machine
30 Ton (C Type)
Make
N.K. Press
Capacity
30 Ton
Qty.
04
Year of Mfg.
2004
Bed Size
460 X 650
Stroke
80 mm
Shut Height
330 mm
Cushion
N.A
Total No. of Machines
Mechanical - 30-250 Tons
18
Hydraulic 50-400 Tons
05
Projection Welding
Projection welding is a variation of spot welding. Projections are designed in one part. These act as current concentrators for the welding process. When the two parts are mated together, these projections are the high points that first make contact. As the power is cycled, the projections simultaneously carry the current and are welded.
Projection Welding M/c
Make
Keja Thermal Weld Eqpt.s
Capacity
125 KVA
Qty.
01
Year of Mfg.
1990
Cushion
Thermoweld Pune
Mig Welding
Gas Metal Arc Welding (GMAW) is frequently referred to as MIG welding. MIG welding is a commonly used high deposition rate welding process. Wire is continuously fed from a spool. MIG welding is therefore referred to as a semiautomatic welding process.
Mig Welding M/c
Make
Weld Tech
Capacity
300 AMP
Qty.
02
Year of Mfg.
2002
Cushion
Advani
Spot Welding
Two copper electrodes are held in the jaws of the spot welding machine, and the material to be welded is clamped between them. Pressure is applied to hold the electrodes tightly together, and electrical current flows through the electrodes and the material. The resistance of the material being welded is so much higher than that of the copper electrodes that enough heat is generated to melt the metal. The pressure on the electrodes forces the molten spots in the two pieces of metal to unite, and this pressure is held after the current stops flowing long enough for the metal to solidify. The amount of current, pressure, and dwell time are all carefully controlled and matched to the type of material and the thickness to produce the correct spot welds.
Spot Welding M/c
Make
Weld Tech
Capacity
300 AMP
Qty.
02
Year of Mfg.
2002
Cushion
Advani
Seam Welding
Rather than having to release the electrodes and move the material to form a series of overlapping spot welds, a seam-welding machine is used to manufacture fuel tanks, enclosures and other components where a continuous weld is needed. Two copper wheels replace the bar-shaped electrodes. The metal to be welded is moved between them, and electric pulses create spots of molten metal that overlap to form the continuous seam.
